A Combination of Xypex Concentrate, Xypex Mega Mix 11 and Xypex Admix C-1000 nf is used to repair and rebuild Jetties and Bridges.  Xypex Concentrate is applied to the concrete surfaces to eliminate  numerous hairline cracks, and provide sustainability of the existing structure.

​

XYPEX MEGAMIX II was applied as a thick repair mortar for the patching and resurfacing of deteriorated concrete. Megamix II has been specifically formulated to produce superior bond, low shrinkage, chemical durability and high strength. It is a one component mortar and can be either sprayed or trowel applied at a thickness of 3/8 - 2 in. (10 - 50 mm) per layer. The high performance characteristics of Megamix II are enhanced by Xypex’s unique crystalline waterproofing and protection technology. 

 

XYPEX ADMIX C-1000/C-1000 NF was added to the concrete mix at the time of batching.for re pouring of structural Beams.  Xypex Admix C-1000/C-1000 NF consists of Portland cement, silica sand (excluding the NF grade) and various active, proprietary chemicals. These active chemicals react with the moisture in fresh concrete and with the byproducts of cement hydration to cause a catalytic reaction. This reaction generates a non-soluble crystalline formation throughout the pores and capillary tracts of the concrete that permanently seals the concrete and prevents the penetration of water and other liquids from any direction.